Insert the second (shorter) side into the other track of the slider.
: If your zipper tape isn't quite long enough, you can "extend" it by sewing fabric tabs to the ends, which also provides a cleaner finish for the edges. c2.zip
: Trim one side of the zipper teeth down by about 1/4 inch. This creates a "lead" that makes it easier to guide the slider onto the other side first. Insert the Slider : Insert the second (shorter) side into the other
: Hold both tape ends firmly and pull the slider down onto the teeth. If the teeth don't align correctly, remove the slider and try again to avoid a bulging track . This creates a "lead" that makes it easier
: Separate about 2–3 inches of the zipper tape at one end.
Slide the first side of the tape into the wider end of the zipper slider.
Are you working on a specific type of project, like a or a garment , that requires a particular sewing technique? How To Put A Zip Head On A Continuous Zip